Rextron Technology, Inc. AcroGear Series, Руководство пользователя

Страница: 10 / 17

Adjust the Video Signal
To adjust the optimal video signal strength corresponding to the length or
quality of DVI cable, the user can press “FUNC” button combining with the
other pushbuttons.
Step 1
. Press “FUNC” button three times, the LED of
“FUNC” will flash one time per second.
Step 2
.
„
Press pushbutton “1” one or two times for adjusting the equalization of
selected port input video strength with one beep (normal) or two beeps
(enhance) respectively.
or
„ Press pushbutton “3” one or two times for adjusting the output current of
selected port with one beep (normal) or two beeps (enhance)
respectively.
or
„ Press pushbutton “4” one, two, three, or four times for adjusting the
output emphasis of selected port with one beep (no pre-emphasis), two
beeps (low pre-emphasis), three beeps (medium pre-emphasis), or four
beeps (high pre-emphasis).
Step 3.
Once the setting is finished, press “FUNC” button one time to exit the
setting.
Select the Audio Signal
To select the audio signal from any port of 4 connected computers, the user
can press “FUNC” button combining with the other pushbuttons.
Step 1
. Press and hold “FUNC” button. Either all of 4 green LEDs light up or
just one green LED lights up. All of 4 green LEDs light up means the
audio port and the selected computer port are the same; we call it as
“tracking mode”. On the other hand, just one green LED lights up (the
selected audio port) means the audio port is different from the
selected computer port; we call it as “non-tracking mode”.
Step 2.
„ While the “FUNC” button is holding, press pushbutton “1” for selecting
audio port 1.
or
7