Rextron Technology, Inc. AcroGear Series, Руководство пользователя

Страница: 11 / 17

„ While the “FUNC” button is holding, press pushbutton “2” for selecting
audio port 2.
or
„ While the “FUNC” button is holding, press pushbutton “3” for selecting
audio port 3.
or
„ While the “FUNC” button is holding, press pushbutton “4” for selecting
audio port 4.
or
„
While the “FUNC” button is holding, press pushbutton “1” AND “2” for
entering the tracking mode.
Step 3.
Once the setting is finished, release “FUNC” button to exit the setting.
Hotkey Commands
The Hot-key command is a short keyboard sequence to select a computer, to
activate computer scan, etc. KVM Switch interprets keystrokes for hot-keys
all the time. A hot-key sequence starts with two left
Ctrl
keystrokes (
in
0.2 seconds
) followed by one or two more keystrokes. A built-in buzzer
generates a high-pitch beep for correct hot-key command; otherwise, one
low-pitch beep for error and the bad key sequence will not be forwarded to the
selected computer.
NOTE
: By pressing left
Shift
+
Num Lock
+
Num Lock
+ left
Ctrl
users can
enable/ disable the hotkey commands.
To select a computer:
Left Ctrl
+
Left Ctrl
+
1
Selects the computer at port 1.
Left Ctrl
+
Left Ctrl
+
2
Selects the computer at port 2
Do not use the keypad at the right of the keyboard.
To start
Auto Scan
, automatically scan power- on computers one by one at a
fixed interval:
8