REXROTH IndraControl VAM 15.1, Руководство по эксплуатации

Страница: 26 / 60

9.8 X3U1: Service interface
The interface "X3U1" is a service interface (mini USB socket) only intended for
the Bosch Rexroth Service (also refer to chapter 17 "Service and support" on
page 49 ).
10 Mounting, demounting and electric installation
10.1 Mounting notes
●
When mounting the machine control panel, ensure an ergonomic operation.
Additionally, ensure that all moving machine components can be seen by the
operator at any time!
●
Avoid installation locations exposed to direct sunlight, as additional heat de-
velopment can occur
●
When mounting the machine control panel, ensure an easy access to the front
panel (top side)
●
Provide a sufficient minimum clearance of 50 mm for cooling and cable rout-
ing behind the device
●
Lay all connecting cables in loops and use strain reliefs for all cables
●
Keep the maximum distance possible from interference sources
10.2 Mounting
Mount the machine control panel as follows:
1. Prepare a mounting cut-out acc. to the specifications in chapter 10.3
"Mounting cut-out" on page 21 .
2. Insert the machine control panel into the cut-out from the front.
3. Fold out the clamp fastenings.
Fig. 10-1: Clamp fastening
4. Tighten the clamping screws.
Bosch Rexroth AG
Mounting, demounting and electric installation Machine Control Panels
20/53
DOK-SUPPL*-VAM*15*21*1-IT02-EN-P