7
------------------------ Installation
Caution:
Do not stare into beam or view directly into the ends of any fiber optic
cables. Exposure to
invisible laser radiation
may result. The laser beam
can cause injury to the eye.
Before Installation
z
Determine where the computer and Extender Unit will be located and set up
z
Use SC to SC duplex Multimode fiber optics cable (50/125 or 62.5/125) for the
interconnection between Computer and Console Unit.
z
Make sure that the Fiber cable length is long enough
(not exceed 2,000 meters)
for the connection between the Computer Unit and the Console Unit to prevent
having to splice fiber. Try to
complete the installation in one pull
●
Prior to the installation, it is important to make sure that all devices you will
connect to this system are properly grounded and powered off.
●
The KVM Extender is HDCP compliant and required to use the HDCP-
compliant display when it is connecting to the HDCP video source.
●
Never attempt to disassemble or reassemble the enclosure for ay purpose. This
may cause personal injury and/or property damage.
Connection Patterns
The
KVM Extender
capability can be dynamically enhanced by using the
KVM
Switch
(es) to expend the number of control on computers/servers, in which users
can connect the
KVM Switch
to the
Console Unit
or
Computer Unit
, connect the
computer to the
Computer Unit
and/or
Console Unit
, and connect the
Console
Unit
to the
Computer Unit
with the appropriate fiber cable. Please follow the
guidelines below for the system connection.
Console Side
Use a DVI (or HDMI) cable for the connection between
Unit
and the monitor display.
Plug a USB keyboard and a USB mouse into the Console’s USB ports.
If needed, plug a set of audio jack from speaker and microphone into the
Console’s speaker port and microphone port respectively
Computer Side
Use a DVI (or HDMI) cable for the connection between the Video port (DVI/ HDMI
connector)
on the
computer side of the
Unit
and the video output port
of the
Computer
.
Use a USB A-B cable to connect the Unit’s USB port (B connector, square
connector) and the USB port on the computer (A connector, flat connector).
If needed, use a set of audio cable to connect the speaker port and microphone
port between the unit and the computer.
