16
------------Alternative Hotkey Control
No matter whether the mask hotkey switch is set to ON or OFF, users can Press
and Hold the Push-Button on the front panel for two seconds instead of the leading
code
[ Ctrl + Ctrl ]
or
[ Ctrl + Ctrl + E ]
for some specific hotkey control on
Extender
Unit
as the follows.
Alternative Hotkey Control on the Computer Unit:
z
Latch Time Selection
Select the duration of latch time:
5, 15, 30,
or
60
seconds.
Press & Hold
Push-Button
2 Sec.
+ F3
z
DVI Mode for Monitor Display
Set the display(s) of both
Console
and
Computer Units
to DVI mode that is
incapable of carrying any audio signals. (Perform this setting before creating
the connection between the Extender Units and/or the KVM Switch(es))
Press & Hold
Push-Button
2 Sec.
+ V + D
z
HDMI Mode for Monitor Display
Set the display(s) on both
Console
and
Computer Units
to HDMI mode that is
capable of carrying high-definition digital audio and video signals. (Perform this
setting only on the Computer Unit before creating the connection between the
Extender Units and/or the KVM Switch(es))
Press & Hold Push-Button 2 Sec. + V + M
NOTE: By factory default, the display mode on Console and Computer Units is set
to DVI mode.
