6.3.3 Digital Signal Internal Wiring
①
Use of terminal TG
②
Use of terminal Reset
Fig. 6-8: Wiring of terminals TG and Reset
Terminals Reset and TG are using the switching signals. Do not need
external power supply.
Fig. 6-9: Wiring of terminals IN and OUT
Terminals IN+, IN-, OUT+ and OUT- are ONLY used in Master / Slave
control mode.
Bosch Rexroth AG
Brake Chopper Wiring
Brake Chopper
32/65
DOK-RCON03-EFC*BRAKE**-IT01-EN-P
