1/16
Inline filter with filter element
according to DIN 24550
Type 245LEN0040 to 400; 245LE0130, 0150
RE 51421/07.11
Replaces: 12.10
Table of contents
Features
Inline filters are used in hydraulic systems for separating solid
materials from the hydraulic fluids and lubricating oils. They are
intended for installation into pipelines.
They distinguish themselves by the following:
– Special highly efficient filter media
– Adsorption of very fine particles across a broad pressure
differential range
– High dirt holding capacity thanks to large specific filter area
– Good chemical resistance of the filter elements
– High collapse resistance of the filter elements
(e.g. in case of cold start)
– Filter ratings of 3 μm to 100 μm
– By default equipped with mechanical optical maintenance
indicator with memory function
– Flow-optimized design due to 3D computer-supported design
Content
Page
Features
1
Ordering code
2
Standard types
3
Ordering code:
Electronic switching element for maintenance indicator
4
Mating connectors according to IEC 60947-5-2
4
Symbols
5
Function, section
6
Technical data
7, 8
Characteristic curves
9...11
Unit dimensions
12
Maintenance indicator
13
Spare parts
14
Installation, commissioning maintenance
15
Quality and standardization
16
Size according to
DIN
24550
: 0040 to 0400
Additional sizes: 0130, 0150
Nominal pressure 250 bar
[3628 psi]
Connection up to G 1 1/2; SAE 1 1/2; SAE 24
Operating temperature –10 °C to 100 °C
[14 °F to 212 °F]
245LEN_d