8-2
Index
REFUdrive 500 RD51
DOK-RD500*-RD51*******-IB01-EN-P
Motor overload 7-7
Motor overtemperature 7-6
New EEPROM 7-4
NTC power section 7-5
Overcurrent 7-7
Overspeed 7-5
Power section 7-4
Power supply 7-5
Pre-charging 7-4
Safety OFF (NAMUR) 7-7
SI1 timeout 7-5
SI2 function 7-5
SI2 timeout 7-6
SI4 function 7-8
SI4 timeout 7-8
SR <==> WS new 7-8
SR-Release? 7-6
Start protection On 7-7
Start protection On (active) 7-8
Switched power supply 7-8
I
Incremental encoder
Connection schematic 3-16
Parameterization 3-15
Signal characteristics 3-15
Technical data 3-16
Incremental encoder connection 3-15
K
Key combinations 4-3
Key function when parameterizing 4-2
Key functions when monitoring 4-2
Key functions when operating 4-1
L
LED display 4-6
List of the alarm- and fault messages 7-2
Locate D-parameter 4-5
M
Menu overview 5-3
Minimum requirements regarding the installation location 2-1
Monitor functions 4-5
Monitor structure 4-4
Monitoring 4-4
Motor optimization / motor evaluation 6-3
Motor running under no-load conditions 6-3
Motor temperature sensor 3-14
O
Operating display 4-5
Operating possibilities 4-1
Operator control and parameterization 4-1
Operator panel with graphic display 4-1
P
Parameterization
Controller setting 5-10
Device control / setpoints 5-6
Diagnostica / drive converter data 5-16
Drive converter settings 5-14
Functions 5-10
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
