Rexroth Indramat Mannesmann DKC21.3, Приложение

Страница: 20 / 38

2-14
Standard Roll Feed Application
DOK-SUPPL*-BTV04*ELW**-AW01-EN-P
2.5 Parameter ELC
The most important parameters for a roll feed are listed below. These
must be adapted to the situation and conditions in and at the facility. The
precise definition of the parameters and the complete parameter descrip-
tions are listed in the ELC documentation.
A100 Applications
0 0
Function encoder 2 (optional measuring wheel):
0 = none
3 = measuring wheel
motion type
0 = rotary (infinitely turning)
A101 Feed Constant
0100.0000
feed constant in EGE
Input min : 0.1000
Input max: 5000.0000
The length resulting from one motor revolution to be run is entered here if
the encoder ratio is not to be given especial consideration (parameter
A102 = 0001 0001).
If the gear ratio is entered in parameter A102, then the feed constant is
the circumference of the draw-off roll.
A102 Gearbox
1000 2000
load gear output revolutions
load gear input revolutions
Input min : 1
Input max: 9999
gear ratio between motor and draw-off roll