Rexroth Indramat Mannesmann DKC21.3, Приложение

Страница: 11 / 38

Application Standard Roll Feed
2-5
DOK-SUPPL*-BTV04*ELW**-AW01-EN-P
Programming Feed Data (F1)
If the function „lengths and speed input“ is pre-selected, then the following
picture appears:
momentary length
+ XXXXX.XXX mm
velocity
XX % of V
max
V
max
= XX m/min
Fig. 2-4: Feed data
Feed length and speeds can be programmed in the dark fields. Using the
NH\VLWLVSRVVLEOHWRPRYHEHWZHHQWKHILHOGV(DFKLQSXWPXVWEH
confirmed with “OK“. The maximum possible speed of the machine is
displayed in the lower line.
Number of pieces input (F2)
To input the number of pieces, the following appears with actual and set-
point number. The setpoint number can be changed in the dark field. This
input must be confirmed with the „OK“ key.
Number of pieces
Actual Setpoint
XXXXXX XXXXXX
Input XXXXX
Fig. 2-5: Feed data
Programmable outputs (Tool selection) (F3)
Four outputs can be set in this menu with which the press, scissors or
other tools can be controlled. The status of the outputs can be changed
once prior to the feed and once after the feed.
The following appears for this setting
Tool before feed
0001
tool no. 12345678
0112
tool after feed
Fig. 2-6: Feed data
The status of the eight outputs can be altered in the darkened field.