Operating your V2 Dashboard Camera
Updating Firmware
40
Updating Firmware
Please note that the firmware does not need to be updated unless you are
experiencing any issues. The firmware is put in place to fix any bugs or glitches
that may occur during normal use.
The following procedure will allow you to use the
Rexing
website to update
firmware for your V2 Dashboard Camera. This is necessary for enabling all
available features on your device.
1.
Download the firmware file to your computer
2.
Unzip the file
3.
Format your memory card in your computer (or unit)
4.
Copy the firmware files to the root of your memory card
5.
Put card into camera
6.
Power camera on (make sure the camera is plugged in)
7.
The camera will update automatically. The screen will stay off but the status
light will light up; it will take 30-60 seconds
8.
(important)
After updating, format the memory card or it will flash every time
9.
Do not disconnect power cord, hold power button to reboot unit
