Getting Started
Quick Start
22
With the device powered down
, press down the memory card until you hear
a click. Gently remove your finger (or other pressing object) to allow the
spring release to push the memory card out of the slot.
Do not remove the memory card while the device is transferring or
accessing information.
Doing so can result in data loss or corruption or
damage to the memory card or device. Rexing is not responsible for losses
that result from the use of damaged memory cards, including the loss of data.
3. Formating a Memory Card
3.1 Powering the Camera
You must always connect the V2 to a power source while operating the
camera.
Connect the camera to your vehicle via the included car charger
cable. Connect the larger end of the car charger cable to your car’s cigarette
lighter (12V DC power outlet), and connect the other Mini-USB end to the
Mini-USB port on the device.
Connecting the charger improperly may cause serious damage to the
device. Any damage caused by misuse is not covered by the warranty.
Use only Rexing-approved chargers. Using unapproved chargers or
cables can damage the device.
If the device receives an unstable power supply, the screen may not
function properly. If the device is not operating properly using a Rexing-
approved charger, please contact Customer Care
