26
1) When the engine is turned
off
, the monitor uses power from its built-in
battery. No external power source is required. This mode requires the battery to
be charged with enough power to start the parking monitoring function.
2) With the use of the smart hardwire kit (sold separately). After the car engine
is turned
off
, the smart hardwire kit detects the power loss and sends a
command to the host device. The system enters a standby state. The mini USB
plug must always be kept connected to the USB port of the device so as to
ensure a constant power supply to the smart hardwire kit.
3) In the above two modes, a video that is locked for about 15 seconds will be
recorded after the dash cam is turned on. When a recording is started, the screen
does not light up and there is no booting sound.
4) When the engine is restarted and the parking monitor has been activated, a
prompt will be immediately indicated as shown below:
5) Monitoring files are saved in the folders VIDEO_F_LOCK and
VIDEO_R_LOCK.
● Time-lapse Recording:
Off
,
on
This feature is
on
when you see this
illuminated
icon in the status bar on the video recording interface, and it is
off
when you see this
grayed out icon. This function is generally used
during parking. It should not be turned
on
while driving. One frame of image is
Notice
Crash happened during parking.
Please check the video.
Содержание M2
Страница 1: ...M2 Users Manual ...
