22
6. Warning Range Setup:
Click
to switch among the four corners of both the left and right square
zones. The corner indicated by the red spot means the zone is currently
adjustable. Click
to adjust the warning range. By touching one of the
four arrows you may move it up, down, left, or right. Click
Save
after making
the appropriate adjustments. Only in this way can the calibration data be saved.
7. Testing: When testing is
on
, as shown above, the image from the rearview
camera shows two warning zones marked in cyan. It is not shown when the
button is
off
. This function is mainly used for demonstration of the warning
ranges. To avoid interference with the image display, it is
off
as a default after
starting the device each time. It is to be manually turned
on
if such a display is
desired.
Tuesday
BSD calibration
Move the red line to the interface
between the sky and ground. Move
the green line to the focal point where
the road intersects with the horizon.
Move the yellow line to the interface
between car’s tail and the ground.
Pause
Next
Tuesday
BSD calibration
The left and right box areas are
warning areas.
Testing on
Save result
Содержание M2
Страница 1: ...M2 Users Manual ...
