background image

3

• 

Thank you for purchasing a Rexener water heater. It is a powerful, easy-to-use and economical 
heater for heating the water in a hot tub or swimming pool.

• 

The Rexener water heater can be installed as the heating system of either a new or existing hot tub 
or swimming pool. It can also be installed in systems equipped with a circulation pump and filter.

• 

We recommend that you read the operating instructions carefully. Once you have read the user 
manual, ensure that it is stored in such a way that it is available to everyone using the heater.

• 

Study the safety instructions with particular care before using the heater.

• 

The conditions in northern countries have been taken into account in the design of the Rexener 
heater.

• 

If you take the heater abroad, check the mains voltage in that new country.

• 

This product comes with a three-year limited warranty.

• 

Due to active product development, the manufacturer reserves the right to make changes to the 
technical specifications and functional descriptions in this manual without separate notice.

GREETINGS FROM THE IMPORTER’S REPRESENTATIVE

Thank you for purchasing a high-quality Rexener water heater. It was developed in Finland over many 
years in close cooperation with the manufacturer Hephzibah Co., Ltd.

During the development, a variety of technical solutions were sought to ensure that the water heater is 
easy to use and reliable in northern climates as well.

The Rexener water heater utilises a number of circuits to monitor and ensure flawless operation. The 
highly-efficient and silent diesel burner ensures the safety of the heater, while the digital control panel 
guarantees ease of use.

The Rexener water heater was designed to be easy to install as the heater of a new hot tub or swimming 
pool, or to replace the heating solutions of either traditional wood-heated hot tubs or swimming pools.

Biodiesel is the recommended fuel for the Rexener water heater, but the device also works flawlessly with 
diesel or red diesel. The heater’s burner and control system require very little power.

Rex Nordic’s swift and proficient maintenance service ensures the reliability of the Rexener water heater.

We hope you enjoy many blissful moments in the warmth provided by the  Rexener water heater

Our warmest greetings

Team Rex Nordic

Содержание PR-200

























Отзывы: