Rexel ClassicCut CL200, Инструкция по эксплуатации

Страница: 4 / 30

4
Safety Guard
CAUTION: Sharp Blade. Lock blade arm down
with safety latch before installing
handle
1
A. Position the safety guard according to illustrations
and fix with screws using a screwdriver ensuring the
edge slot of the safety guard located with the retaining
bracket (CL200)/ screw (CL410/CL420).
2
Safety guard should now be locked in place and is ready
for you to start.
m
Specifications
Rexel ClassicCut™ CL200
2101972
15
310mm
A7, A6, A5 & A4
Centimetres and Inches
15, 30, 45 & 60
n/a
n/a
Models
Product Code
Sheet Capacity 80g/m
2
Cutting Length
Integrated Paper Guide
Size Guide
Diagonal Lines
Laserlight Power Source
Laserlight Power Class 2
Rexel ClassicCut™ CL410
2101973
25
390mm
A7, A6, A5 & A4
Centimetres and Inches
15, 30, 45 & 60
2xAAA - 1.5v batteries included
<1mW 650nM
Rexel ClassicCut™ CL420
2101974
25
467mm
A7, A6, A5, A4 & A3
Centimetres and Inches
15, 30, 45 & 60
2xAAA - 1.5v batteries included
<1mW 650nM
m
CAUTION: Guillotine should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade
m
CAUTION: Always secure the safety guard to the
handle using the retaining bracket
(CL200)/ screw (CL410/CL420)
m
NOTE: Please retain this information regarding
safe operation of this paper guillotine
m
CAUTION: Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure
m
CAUTION: Do not carry the guillotine by holding
the cutting blade or the cutting arm
m
CAUTION: Always latch the blade/handle in the
down, closed position when not in use
m
CAUTION: Do not lubricate the blade
m
CAUTION: Always operate the guillotine with the
safety guard in place
m
CAUTION: Laser Radiation - do not stare into the
beam - Class 2 Laser Product
m
CAUTION: Before use ensure raised handle blade
does not fall when handle is released.
Do not attempt to adjust any parts.
1
Guillotine base with calibrated grid
2
Metric and Imperial scale guide
3
Transparent safetyguard
4
Cutting arm / Handle
5
Cutting arm safety latch
6
Laser light aperture (CL410/CL420)
7
Laser light button (CL410/CL420)
8
Carry Handle
9
Heavy Duty Paper Clamp (CL420)
J
Back Stop
K
Safety guard/handle retainer
M L