3. Using the Device
This section describes how to get the maximum benefit from your blood pressure monitor. Follow the instructions
carefully to get an accurate measurement of your blood pressure and pulse rate.
NOTE:
Setting the user, year, month, date and time is one sequential process.
3.1 Select the User
1. Start with the power off, but with batteries or adapter inserted.
2. Press the
SET
button 1 time, the user will appear in the upper left corner. Use the
MEM
button to choose
user or
3.2 Setting the Time, Date and Year
1. Immediately after selecting the user, press the
SET
button, the YEAR will flash. Use the
MEM
button to
choose the year and press
SET
to store in the memory.
2. Repeat the same process to set the MONTH by using the
MEM
button. Press the
SET
button to store it in the
memory.
3. The same process is repeated to set the DATE. The date will flash and can be changed with the
MEM
button.
Afterwards, HOURS will begin to flash.
4. TIME; hours, and then minutes can be set following the same procedure by using the
MEM
buttons. Finish
the process by pressing the
SET
button and the USER, YEAR, MONTH, DATE, HOUR and MINUTES will all be
stored in the products memory.
NOTE:
In order to change any setting you must repeat the process and confirm each setting by pushing the
SET
button.
3.3 Obtaining Accurate Measurements
Your blood pressure can vary based on numerous factors, physiological conditions, and your surroundings. Follow
these guidelines to obtain accurate and error-free measurements of your blood pressure and pulse rate.
3.3A Tips on Taking Accurate Measurements
In morning before breakfast, 2
hours after dinner, before taking
medication.
Avoid coffee and smoking within the
hour, and no exercise 30 minutes
before measuring.
Do not speak while taking the
measurement.
Sit with legs uncrossed so as not to
restrict blood flow.
Empty bladder (if necessary).
Rest quietly for 5 minutes.
Remain calm and quiet while the
measurement is in process.
Take measurements on the non
dominant arm.
Sit with back supported and
measurement arm resting on a table.
Sit with feet flat on the floor.
Ensure that the BP monitor is level
with the heart while the arm is
supported on the table.
Reprinted by permission of BIOS Diagnostics
Содержание RX810
Страница 1: ...Model RX810 Instruction Manual 10 17 18 ...
