8
the charging automatically stoped and red LED on the charger turn off and indicates that the
battery is fully charged.
Always charge device's storage batteries ONLY with the paired chargers to it. Thus
you will prevent damages or confusion b
etween “+” and “-” because the use of other
chargers or adaptors may lead to irretrievable damages in the batteries!
6
.
Possible problems during exploitation of “
VEGA
”:
6.1
. When switching it on you can not hear a sound, there is no information on the
display, no indication that the device is switched on. It might indicate for:
- Accumulator battery is dead (usually after a long period of time). Charge the battery
with the charger. If the problem is not solved contact the service-station (office) of the
company manufacturer or the local distributor.
6.2.
The working depth is significantly shallower than the normal. It might indicate for:
- Accumulator battery could be discharged
– pay attention to the shown for the capacity of
the battery. If it is under
12V,
charge the batteries with the automatic charger. If you can not
solve the problem contact the service-station (office) of the company manufacturer or the
local distributor.
6.3.
During detection the device does not work stable, makes strange sounds which
are not due to a metal detection. It might indicate for:
-irregular electromagnetic external interruptions.
-problems with the aerial cable
– disconnected conductor, a shot circuit or bad connection in
the coupling.
It is possible after continuance work and many times of switching on and off the
cable's coupling to the jack box the contact between them to be destroyed. There are 2
terminals with sightholes in the jack of the back panel of the device. Put something sharp
like a knife or a screwdriver in the sightholes and make them wider. Thus the coupling will fit
better into the jack which will improve the contact between them. It is possible in the
presence of some kind of dirty like dust or moisture to clean the terminals with cotton-wool
and alcohol. If you can not solve the problem contact the service-station (office) of the
company manufacturer or the local distributor.
