Revolabs Solo Executive, Инструкция по установке и эксплуатации

Страница: 11 / 16

9
9 9
9
System Functions
The following table shows the functions supported by the Solo Executive System:
Function
Base
Station
Status Wireless
Microphone
Status
Action
Enter Pairing Mode
On Off
Press microphone MUTE button for 6 seconds, and then press the
pairing button on the Base Station for 6 seconds.
Mute
On On
Short press of microphone MUTE button causes flashing RED LED
indicating microphone has audio muted.
Turn Off Microphones
On/Off On
Press microphone MUTE button for approx. 10 seconds until LED
stays solid RED to turn off microphone.
Turn On Microphones
On/Off Off
Quickly dock microphone into charge base
Or
Press & hold (3 Sec) microphone
MUTE button until LED flashes on.
Note:
If the link abnormally disconnects (for example, a microphone is worn out of range) the
wireless microphone will try to re-establish the link for ~15 minutes, and then turn off
automatically. The microphone will beep five times every 30 seconds as a reminder to return the
microphone to the Charger Base.