Revo 4 Channel Digital Video Recorder, Руководство пользователя

Страница: 30 / 46

User’s Manual
24
Chapter 3
— Operation
NOTE: This chapter assumes your DVR has been installed and configured. If it has not, please refer to Chapter 2 .
LIVE MONITORING
As soon as the DVR completes its initialization process, it will begin displaying live video on the attached monitor and
playing live audio through the built-in speaker. The default mode is to display all cameras at once. Pressing any camera
button on the remote control will cause that camera to display full screen. The DVR continues displaying live video
and playing live audio until the user enters another mode.
Press the
Menu
button on the remote control, and the following menu icons display at the top of the screen. Pressing
the Menu button again hides the menu icons. You can navigate through menus and items by pressing the arrow buttons
on the remote control.
Freeze
Sequence
Speaker
Camera Menu
LCD Off
Setup
Search Mode
Login/Logout
NOTE: The menu icons also can be displayed by moving the mouse pointer to the top of the screen.
LIVE MONITORING MENU
Freeze
Selecting
(Freeze) in the Live Monitoring menu will freeze the current image on the screen. It is the same as pressing
the (Enter/Pause) button on the remote control. Selecting again in the Live Monitoring menu or pressing a camera
button on the remote control exits the Freeze mode. While in the Freeze mode, the icon displays in bottom-left corner
if
Freeze
is selected in the Display setup screen (OSD tab).
Sequence
Selecting
(Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as pressing
and holding the Menu button on the remote control for three seconds or longer. Selecting again in the Live Monitoring
menu exits the Sequence mode. While in the Sequence mode, the icon displays in bottom-left corner if Sequence is
selected in the Display setup screen (OSD tab). If all the cameras in a page are Off or have lost video, that page will be
excluded from the sequence.
Speaker
Selecting
(Speaker) in the Live Monitoring menu icon allows you to control the volume of the built-in speaker.