Revo 4 Channel Digital Video Recorder, Руководство пользователя

Страница: 20 / 46

User’s Manual
14

Enable SSL for Transferring Data
: Selecting the box turns the SSL (Secure Sockets Layer) authentication On.
When it is On, the security of data, except video transmitted for remote monitoring or remote recording can be enhanced
by using the SSL (Secure Sockets Layer) authentication. When using the SSL function, the DVR cannot be connected
with a remote program or a network keyboard which does not support the SSL function.
CAUTION: The remote connection will be disconnected temporarily after changing the SSL
settings.
NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).

Use REVO Remote Service:
Selecting the box turns the REVO Remote service On. Select the port number used
when accessing REVO Remote. See Appendix – REVO Remote f or details.

Mac Address:
Displays the MAC (Media Access Control) address of the DVR.
Network Settings (NETWORK

Network Tab)

Type : Select the type of network configuration from:
Manual, DHCP and ADSL (with PPPoE).
Manual – You can select
Manual
when using a static IP address
for network connection. Set up LAN parameters manually.
Set the numbers of the IP Address, Gateway and Subnet Mask.
DHCP – You can select
DHCP
when the DVR is networked
through DHCP (Dynamic Host Configuration Protocol). The
DVR reads the IP address from DHCP network when selecting
the
Save button.
ADSL – You can select
ADSL (with PPPoE)
when the DVR
is networked through ADSL. Enter the ID and password for
ADSL connection, and the DVR receives the IP address when
selecting the
Save
button.
NOTE: Ask your network provider for your network connection type and connection information.
NOTE: If the DVR is configured for DHCP or ADSL, the IP address of the DVR might change whenever the unit
is turned on. If you want to use the DVRNS function, you will need to get the IP Address of the DNS Server from
the Internet service provider.

DNS Server
: Set the DNS server IP address obtained from your network administrator. If you set up the DNS Server,
the domain name of the DVRNS server or SMTP server instead of the IP address can be used during DVRNS Server or
Mail setup. Checking the
Auto
(Default) box allows the DVR to obtain the IP address of the DNS server automatically.
NOTE: Selecting Auto will only be enabled when the DVR is configured for DHCP or an ADSL network.

Port Number Setup
…
: Set the port number of each remote software related
program.
NOTE: You will need to get the appropriate Port Numbers for each remote
software related program from your network administrator. Do NOT use the
same port number for two different programs, otherwise, the DVR cannot be
connected with the PC running REVO Remote Pro
or REVO Remote.