Pairing Your Headset
In order to use your RevJams LITE Bluetooth Stereo
Earbuds with a Bluetooth-enabled device, you will
first need to pair the two.
1. Place the headset and the mobile phone where
they are easily viewable and no more than 3 ft. apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is turned off (Very
important)
4. Press the Multi-Function button for approximately
8-10 seconds until the RED AND BLUE LIGHT FLASH
ALTERNATELY which indicates that you are in Pairing
Mode. The voice prompt will confirm “pairing” once
the pairing is successful
5. Activate your mobile phone's Bluetooth pairing
function.
6. Set the mobile phone to search for Bluetooth
devices within range and select “RevJams Lite” from
the list of devices shown.
7. If you are prompted for a Passcode enter “0000”
and press “ok” to pair the headset with your mobile
phone. (Note: If the Bluetooth version of your phone
is 2.1, there is no need to enter the passcode when
pairing.)
8. Now you can use your Bluetooth headset to listen
to music, and make and receive phone calls. Some
mobile phones will connect automatically to the
RevJams LITE Bluetooth Stereo Earbuds when
powered on.
