background image

Ambia

True Wireless Stereo Earphones 

TLL511361 - User manual

Technical specifications:

Bluetooth version:

 5.0+EDR, BLE

Wireless range:

 10m

Audio type:

 True Wireless Stereo

Supported profiles:

 HSP, HFP, A2DP, AVRCP 

ENC technology:

 Yes, 4-microphone call technology

Audio codecs supported:

 SBC, AAC

Speaker Size:

 6.0mm

Frequency response:

 20Hz - 20KHz

Impedance:

 16Ω

Sensitivity:

 103dB (3dB) @ 1 KHz,126mV

Rated power:

 3mW

Microphone Type:

 4 x MEMS

Sensitivity:

 42dB ±3dB

SNR: 

60dB

THD: 

less than 1% 94dB SPL @1kHz

Impedance:

 200Ω

Sweat and water resistant:

 IPX4

Features:

 ENC technology, Voice commands, Wearing detection, 

Tap control, Intelligent Switching, Auto-connect

Music play time:

 Up to 3.5 hours and up to 25 hours including 

charging case

Standby time:

 Up to 120 hours

Charge time:

 Approx. 2 hours

Battery capacity:

 500mAh/3.7V (charging box), 30mAh /3.7V (earphones)

Charging plug:

 Type-C

Dimensions:

 43 x 24.5 x 18 mm

Charging case dimensions:

 72.6 x 32.6 x 28 mm

Weight earphone:

 5g 

Weight charging case:

 38g

Color: 

Black

Package includes:

 1 x Ambia True Wireless Earphones

1 x Charging case

1 x USB to Type-C cable

3 x Set of eartips

1 x User manual

Operating temperature:

 -15°C to 45°C

Product Code:

 TLL511361

EAN:

 5949120002691

Specificatii tehnice:

Versiune Bluetooth: 

5.0+EDR, BLE

Raza de actiune: 

10m

Audio: 

True Wireless Stereo

Profile suportate: 

HSP, HFP, A2DP, AVRCP

 

Tehnologie ENC: 

Da, tehnologie pentru apeluri bazata pe 4 microfoane

Codec-uri audio suportate: 

SBC, AAC

Dimensiune difuzor : 

6.0mm

Raspuns in frecventa: 

20Hz - 20KHz

Impedanta: 

16Ω

Sensibilitate: 

103dB (3dB) @ 1 KHz,126mV

Putere: 

3mW

Tip microfon: 

4 x MEMS

Sensibilitate: 

42dB ±3dB

SNR: 

60dB

THD: 

mai putin de 1% 94dB SPL @1kHz

Impedanta: 

200Ω

Rezistenta la apa si transpiratie: 

IPX4

Caracteristici principale: 

Comenzi vocale si tactile, Senzori cu 

infrarosu, Comutare inteligenta intre casti, 

Conectare automata

Timp muzica: 

Pana la 3.5 ore si pana la 25 ore impreuna cu cutia de 

incarcare

Timp standby: 

Pana la 120 ore

Timp incarcare: 

Aproximativ 2 ore

Capacitate baterie: 

500mAh/3.7V (cutie incarcare), 30mAh /3.7V (casti)

Mufa de incarcare: 

Type-C

Dimensiuni: 

43 x 24.5 x 18 mm

Dimenisuni cutie incarcare: 

72.6 x 32.6 x 28 mm

Greutate: 

5g

 

Greutate cutie incarcare: 

38g

Culoare: 

Negru

Pachetul include: 

1 x Casti Ambia True Wireless

 

1 x Cutie de incarcare

1 x Cablu USB to Type-C

3 x Seturi de intra-auriculare

1 x Manual

Temperatura de operare: 

 -15°C - 45°C

Cod produs: 

TLL511361

EAN: 

5949120002691

Features

Environmental Noise Canceling technology (ENC)

Each earphone is equipped with 2 high-performance MEMS microphones

with ENC technology for a better environmental noise cancelation when 

making hands-free calls (especially in rowdy environments: on the 

street, in coffee shops, restaurants, open plan offices etc.). 

Wearing detection

Built-in infrared sensors let the earphones know when you are wearing 

them. You can remove either earphone to pause music automatically or 

you can put the earphone back in your ear to resume playback.

Voice commands

Voice commands allow you to answer/reject and incoming call and 

control your music without touching your smartphone or earphones. 

Tap control

Built-in triaxial acceleration sensor allows tap control for music and 

hands-free calls. 

Intelligent switch

The integrated Bluetooth chipset enables an automatic switch between

the main earphone and the auxiliary one. This option allows you to use

one earphone at a time and double your hands-free talk autonomy.  

Automatic connection

After pairing the earphones with your device via Bluetooth, the earphones

will reconnect automatically whenever you open the charging case.

Stunning sound

Equipped with superior dynamic drivers and a balanced audio 

equalization, Ambia earphones offer a stunning sound with a crisp 

treble, natural high notes and a deep, rich bass.

Fit & comfortable wear

Ergonomic in-ear design, light, soft and skin-friendly silicone with 3 

pairs of replaceable ear tips (S, M, L) ensure a fit and comfortable wear.

Turning on

With the earphones inside the charging case, open the case and the 

earphones will power on automatically. 

Note! 

Please make sure the earphones are charged for more than 10 minutes 

(in the charging case) before using them for the first time. 

Connecting and disconnecting

1. Connect

1.1.  With the earphones inside the charging case, open the charging 

case and press the button from the back of the case for 5 seconds, 

until the blue light starts flashing.

1.2. Turn on your mobile phone’s Bluetooth, search for “Tellur Ambia” 

and connect it.

2. Automatic reconnection

If the earphones have already been paired with a mobile phone, open the

charging case and the earphones will reconnect with the phone 

automatically (if the two devices are within Bluetooth range).

3. Disconnect

The earphones will automatically disconnect from your mobile phone 

when the charging case will be closed (with the earphones inside).

4. Automatically disconnect outside Bluetooth range

When the earphones and your mobile phone are out of the Bluetooth 

range (10 meters), the earphones will automatically disconnect from 

your phone. If you return to the signal connection range within 3 minutes,

the earphones will reconnect automatically.

5. Connect with another phone

If you want to connect the earphones with another phone, please follow

the steps described in the “Connect” section above (the earphones do 

not support simultaneous connection with two phones).

Tips:

1. If the automatic reconnection fails, please reestablish the Bluetooth connection

manually or put the earphones back into the charging case for more than 

15 seconds and open the charging case – the earphones should reconnect 

automatically. 

2. Due to the characteristics of the Bluetooth earphones, the electromagnetic

waves in your area may interfere with the connection, turning the earphones 

silent or disconnecting them. 

This m

anual is

 available in more languages on www.tellur.co

m

Power ON/OFF

With the earphones into the charging case:

1. Open the charging case – the earphones will power on.

2. Close the charging case – the earphones will power off.

Earphones functions

1. Music playing mode

1.1 With the earphones in music playing mode, double tap the right 

earphone to pause and resume playback.  

1.2 When you remove an earbud from your ear while listening to music,

the music will automatically pause.

1.3 To resume playback, put the earphone back in your ear.

1.4 When using only one earbud, double tap the earphone to play and 

pause music (please make sure the other earbud is into the charging

case, with the case closed for more than 3 seconds).

2. Voice assistant

When the earphones are in music playing mode or in standby, double tap

the left earphone to awake your voice assistant.

3. Hands-free call mode

Double-tap any earphone to answer and redouble-tap to hang up. 

Tips:

Please activate the voice assistant on your mobile phone before using the 

earphones’ voice assistant function.

Voice commands

Use these simple voice commands below to control your music and 

hands-free calls:  

Restore to factory settings

1. Restore to factory settings

1.1 Put both earphones into the charging case and keep the cover open.

1.2 Press the button on the back of the charging case for 10 seconds 

until the red light start flashing. When the green light blinks twice, 

the factory settings are successfully restored.

2. Automatic restart 

Keep the earphones inside the charging case for 15 seconds, then open

the case and the earphones will be restarted automatically. 

Please make sure that both earphones are connected successfully with 

your phone before getting them out of the charging case.

Charging

1. For the earphones

When the earphones are connected to the mobile phone, the status bar

will display the earphones’ battery autonomy (function supported by 

80% of the mobile phones in the market).

2. Charging the earphones

2.1 Put the earphones into the charging case and the green light will 

flash, indicating that the earphones have entered charging state.

2.2 When the charging case is opened, if the light is flashing red, the

battery is low; when the light turns green, the battery is charged. 

2.3 If you press the button on the back of the charging case and the 

light flashes red, the battery is low; if the light is green, the battery

is charged. 

3. Charging the charging case

Using the supplied charging cable, plug the Type-C connector into the 

charging case and the USB-A connector into a power supply or a 

certified wall charger. When the light is red, the battery is charging. 

When the light turns green, the charging case is fully charged.

Voice command

“Accept call”

“Reject call”

“Play music”

“Pause music”

“Next song”

“Previous song”

“Volume up”

“Volume down”

Action

Answer call

Reject call

Play music

 

Pause music

  Next 

song

 

Previous song

 

Volume up

Volume down

FAQ

Headset cannot be searched, or it disconnects during using

1. Do not exceed the Bluetooth connection range.

2. Check the battery status of your earphones as well as the battery of the 

chargingcase.

3. Put the earphones into the charging case, close the case and open it after 15 

seconds - the earphones will automatically connect with the phone.

4. If the above steps do not solve the issue, put the earphones into the charging 

case, keep the cover open and long press the button on the back of the charging

case for 10 seconds. When the light flashes red and then flashes green, the 

factory settings have been successfully restored. Long press the button until the

blue light flashes, search for “Tellur Ambia” and pair it again with your phone 

(for iPhone users, please delete the previous connection before pairing again). 

Distorted sound 

1. Adjust the location of your phone and the earphones to avoid any 

interference from walls or your body.

2. Put the earphones into the charging case, close the case and open it 

after 15 seconds - the earphones will automatically connect with the

phone. 

3. If these steps do not solve the issue, restore the factory settings 

(as explained above).

Tips: 

Due to the characteristics of the Bluetooth earphones, the electromagnetic

waves in your area may interfere with the connection, turning the earphones

silent or disconnecting them. Please avoid using the earphones in such 

environments. 

Tap control function does not work  

To avoid accidental touch, the tap control function will only be available after 3 

seconds from the moment you put the earphones into your ear.   

When using only the left earbud, with the right earbud kept in the charging case, if 

you keep the charging case open, the two earbuds will remain connected and the 

tap function on the left earbud will awake the voice assistant. If you close the 

charging case, the left earbud will switch to “single ear mode” and the tap function 

will control music playback (play/pause). 

When answering an incoming call by tapping the earphones, the  soundis 

outputted through the earphones. When answering an incoming call by sliding 

the phone’s screen, some mobile phones output the sound through the phone’s 

speakers, others output the sound through the earphones. 

Different mobile phones will behave differently based on the logical design of their 

system. All mobile phones will output the sound through the earphones when 

answering an incoming call by tapping the earphones. However, if you answer an 

incoming call by sliding the phone’s screen, some mobile phones will output the 

sound through the phone’s speakers due to different logic processing.

 

            Declaration of conformity

We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector 1, Marinarilor 

street, nr. 31, we declare on own responsibility that the products below:

Product description   

 

Brand 

Product code

Ambia True Wireless Earphones, black  

Tellur 

TLL511361

Does not endanger life, health, work safety, does not have a negative impact on 

the environment and corresponds to the standards stated in the manufacturer's 

declaration of conformity.

The products are compliant with the following standards and / or other normative 

documents:

RED – 2014/53/EU

 

Applied standards: 

ETSI EN 301 489-1 V2.2.0:2017

ETSI EN 301 489-17 V3.2.0:2017

EN 55032:2015

EN 55035:2017

EN 61000-3-2:2014

EN 61000-3-3:2013

ETSI EN 300 328 V2.1.1:2016

EN 62479:2010

EN 62368-1:2014+A11:2017

RoHS – 2011/65/EU

The product bears CE mark, applied in 2020.

 Name: George Barbu 

Function: General manager

 

Place and date: Bucharest, 22-05-2020

Signed:

Disposal and recycling information

The crossed-out wheeled-bin symbol on your

product, battery, literature or packaging reminds you that all electronic products and batteries 

must be taken to separate waste collection points at the end of their working lives; they must not 

be disposed of in the normal waste stream with household garbage. It is the responsibility of the 

user to dispose of the equipment using a designated collection point or service for separate 

recycling of waste electrical and electronic equipment (WEEE) and batteries according to local 

laws. Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a 

manner that conserves valuable materials and protects human health and the environment, 

improper handling, accidental breakage, damage, and/or improper recycling at the end of its life 

may be harmful for health and environment.

Casti Ambia

True Wireless Stereo

TLL511361 - Manual de utilizare

Содержание Ambia TLL511361








Отзывы: