Reverse Tap V20, Руководство пользователя, Страница: 6 / 20


Beverage is not discharged

Make sure to check KEG and CO2 gas valve before use

If valve is locked, then beverage is not discharged.

Make sure to check residual beverage in KEG before use

If beverage is insufficient, beverage is not discharged.

Make sure to check residual CO2 before use

If CO2 is insufficient, beverage is not discharged.

When lots of bubble is generated

Make sure to check that valve and nozzle is cooled before use

When this product is first installed, lots of bubble may be generated from
nozzle and valve due to differences in temperature.

Remove bubble in beverage pipe before using this product

Bubble may be generated due to residual bubble in pipe

Before using this product, make sure to remove leakage in connecting
area of various pipes

Leakage in pipe connection may generate bubble

Make sure to fit flow rate by adjusting valve in beverage pipe

Bubble may be generated due to rapid flow rate

Use this product after temperature of beverage is cooled

High temperature of beverage may cause bubble

Use the product when beverage in KEG is sufficient

If beverage is insufficient, bubble may be generated.
C
H
E
C
K
L
I
S
T
B
E
F
O
R
E
U
S
E
6

Configuration Item
1. Top cover 2. Top cover cap 3. Gripper
5. DC power adaptor
6. Hose band 7. Drain hose