H
O
W
T
O
U
S
E
D
I
S
P
E
N
S
E
R
14
■ Changing KEG capacity
This enables to set amount of discharge and capacity of KEG
KEG ALARM
0.1 SEC : 6.25 CC
ALARM : 18000 CC
By pushing left and right button, select illumination change mode,
then currently set mode
is displayed.
If you push button, the machine is ready to change setting along with
beep sounds. You can also change set value by button
Finally, if you push button, then setting is completed along with beep
sound. Next make sure to save setting by pushing button for long
time.
Setting is not changed although power is turned off. ‘Changing amount of
discharge’ enables to change setting of discharging amount. Amount of
discharge can be changed every 0.05 CC using button.
‘ALARM is changed by every 100 cc. This set value is for changing amount
of alarm in waiting screen.
** This setting doesn’t change amount of discharge but change standard
value of discharging amount based on measured value. If you want to
change standard value, then push button for long time, then it is
recovered to initial value.
