Headboard Bracket Assembly
PARTS LIST
A. Inner Headboard Bracket (2)
B. Outer Headboard Bracket (2)
C. Inner Headboard Bracket Bolt (4)
D. Outer Headboard Bracket Bolt (4)
E. 5/16 Inch Washer (16)
F. 5/16 Inch Locking Nut (8)
G. Allen Key ( 1)
H. Wrench (1)
- Remove Head end rail.
- Loosen cam lock at both corners.
- Loosen and remove hardware
(bolts/nuts) from the two inside slide
brackets of each rail.
- Gently detach the head and foot
rails. [see figures 1A,1B, and 1C]
A.
C.
B.
E.
H.
G.
D.
F.
STEP 7
STEP 1
STEP 3
STEP 2
STEP 1B
STEP 4
STEP 5
STEP 6
Figure 1A
Figure 1C
Figure 1B
Use the remote control to raise the
head of the base in order to gain
access to the power base frame.
Remove plastic cap and place the
Inner Headboard Bracket (D) into the
round tube frame making sure the
bracket inserted into the round tube.
This will create a box shape. Place
the Headboard Bracket Bolt (G) with
a 5/16 Inch Washer (J) through the
pre-drilled hole in the round tube
frame and pass it through the Inner
Headboard Bracket. Use the 5/16
Inch Washer (J) and the 5/16 Inch
Bracket. Use the 5/16 Inch Washer
(J) and 5/16 Inch (K) and tighten the
bolt in place. Repeat for the opposing
side of the power base frame.
Place the open side of the outer
headboard bracket (E) onto the
exposed square tube of the inner
headboard bracket (D). This will
create a tight fit between (D) and (E).
Place a Headboard Bracket Bold (G)
with a 5/16 Inch Washer (J) through
the Outer Headboard Bracket (E)
and into Inner Headboard Bracket
(D). Use a 5/16 Inch Washer (J)
and 5/16 Inch Locking Nut (K) and
hand tighten to allow for adjustment.
Repeat same procedure for opposing
side of the power base frame.
Firmly tighten the headboard bolts
(not included) to the end of the
headboard bracket assembly.
Measure the distance of the center
to center mounting holes in the
headboard bracket assemblies.
Measure the distance of the center
to center mounting holes in the
headboard.
If the headboard brackets require
adjustments, loosen the bolts that are
holding the outer headboard brackets
and move them to the necessary
distance. Reinstall the bolts and
firmly tighten.
