REVENTON INSPIRO BASIC 200, Техническая документация инструкция

Страница: 2 / 10

Filters: the unit has two prefilters G3 (on the supply and exhaust),which properly
maintained (see point 5) guarantee appropriate purityof the air supplied
to the rooms.
Supply and exhaust fan: 3-stage AC fans which ensure airflow through
the exchanger and ventilation ducts . Detailed performance characteristics
of the whole units can be found in section 2.4.
2.2 DEVICE DIMENSIONS
INSPIRO BASIC 200
INSPIRO BASIC 300 - INSPIRO BASIC 800
1.INTRODUCTION
1.1 PRECAUTIONS
1.2 TRANSPORT
1.3 PACKAGE CONTENT
1.4 USE
2. DEVICE CHARACTERISTIC
2.1 CONSTRUCTION AND PRINCIPLE OF OPERATION
2.2 DEVICE DIMENSIONS
2.3 DEVICE TECHNICAL DATA
2.4
WORKING CHARACTERISTICS
3. ASSEMBLY
3.1 GENERAL PRINCIPLES
3.2
DUCTING
4. INSTALLATION INSTRUCTIONS
4.1 CONNECTION OF THE DEVICE TO THE ELECTRICAL SYSTEM
5. PRECAUTIONS & WARNINGS
6.CONTROLS
6.1 CHARACTERISTIC
6.2 COMMISSIONING
6.3 CONTROL PANEL BASIC
7. CONNECTIONS SCHEMES
8. TERMS OF WARRANTY
1.
INTRODUCTION
Thank you very much for purchasing energy recovery unit INSPIRO BASIC.
We would like to congratulate you on excellent choice. Please read and keep this
manual.
1.1 PRECAUTIONS
The buyer and the user of the device Reventon Group brand should read carefully
the following instructions and proceed to the content recommendations.
Proceeding due to the following instruction guarantees the correct usage
and safety. In case of any doubts please contact directly Reventon Group sp. z o. o.
[Ltd.].
The supplier reserves the rights to make changes to the technical
documentation without previous notice. Reventon Group sp. z o. o. [Ltd.]
is not responsible for the damages which occur due to improper installation,
not keeping the device in repair or using the device out of line. The installation
should be carried out by the professional installers, who possessthe
qualifications to install these types of devices. The installers are responsiblefor
making the installation as instructed in the technical data. In case
of unserviceable please plug out the device and contact with the authorizedfor
repair person or the supplier. During the installation, use, service and periodical
inspections all regulations and safety rules must be followed.
1.2 TRANSPORT
During the acceptance of goods, it is needed to check the device to exclude
any damages. During the transport, it is needed to use the proper equipment,
it is necessary to carry the device by two people. In case of any damages please fill
in the damage report in presence of the supplier.
1.3 PACKAGE CONTENT
- energy recovery unit
- instruction and warranty card
- control panel STANDARD
1.4 USE
Energy revocery units Reventon Group INSPIRO BASIC series are designed
for ventilation systems as an important element enabling energy recovery
(heat and moisture). These devices enables ventliation of the building.
They are designed for ventilation of residential buildings as well as halls,
warehouses, shops, services or workshops. Energy recovery allows
for a significant reduction of the building's operating costs.
2. DEVICE CHARACTERISTICS
2.1 CONSTRUCTION AND PRINCIPLE OF OPERATION
Casing: made of steel. It has handles for easy assembly of the device.
The connectors are made of plastic and have diameters enables of installation
of the most popular sizes of ventilation ducts. The housing has an inspection door
that allows for easy access to filters and exchanger.
Enthalpy heat exchanger: made of the special material enabling efficient
recovery of heat and moisture from room exhaust air . Thanks to the recovery
of moisture in many cases there is no need for using additional humidifier.
EN
TECHNICAL DOCUMENTATION