- 9 -
Features & Requirements:
To activate following features of the UTCOMP some signals have to be connected. What kind of signal for each function is required shows the table
below. You should connect only what are you interested with. You do not have to connect all signals.
Group
Example features
Requirements
No of wires
I
•
date and time
•
battery voltage (voltmeter) + alerts
•
travel time
•
service & inspection with reminder (x2 for mot x2 for
date)
•
customizable user screen(s)
•
splash screen (text or bitmap)
power supply
3
II
•
temperatures (inside, outside, oil, engine, user-1, user-2)
•
alerts for temperatures (customizable, e.g. black ice alert,
engine/oil temperature warnings etc.)
temperature sensor
(analog NTC or digital DS18B20)
3 - for each digital sensor
1 - for each analog sensor
III
•
vehicle speed (real-time velocity, average, maximum)
•
distance travelled
•
mileage
•
acceleration (and deceleration) measurement with user defined
ranges
•
trip meter for off-road (normal/reverse/freeze modes)
•
service & inspections with reminder (x4 for milage)
•
speed limit alert
vehicle speed signal (VSS)
(ref. to section 2.4.6)
1
IV
•
current fuel consumption for PB/ON
•
average fuel consumption for PB/ON
•
travel cost
•
trip summary
fuel consumption signal
(ref. to section 2.4.5)
+ req. from group III
1 (2)
V
•
full support for vehicles with LPG system
signal from LPG electrovalve or injector
1
