REVELL Control LATERALIS, Руководство пользователя

Страница: 16 / 56

English
15
Remote control battery
safety instructions:
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries must be
removed from the remote control
prior to recharging.
• Rechargeable batteries may only be
charged under the supervision of an
adult.
• Combinations of batteries of different
types or new and used batteries may
not be used.
• Only the recommended batteries or
those of an equivalent type may be
used.
• Batteries must be inserted with the
correct polarity (+ and -).
• Depleted batteries must be removed
from the remote control.
• The connection terminals may not be
short-circuited. Please remove the
batteries from the remote control if
it is not to be used for an extended
period of time.
The helicopter is equipped
with a rechargeable lithium
polymer battery. Please observe
the following safety instructions:
• Never throw LiPo batteries into a fire
or store in hot places.
• Only use the supplied charging unit
to charge the battery. The use of a
different charging unit may lead to
the permanent damage of the battery
and neighbouring parts, as well as
physical injury!
• Never use a charging unit for
NiCd/NiMH batteries!
• Always ensure that the charging
process takes place on a fireproof
surface in a fire-resistant environ-
ment.
• Do not leave the battery unsupervised
during the charging and discharging
process.
• Never disassemble or alter the battery
contacts. Do not damage or puncture
the battery cells.
There is a risk of explosion!
• The LiPo battery must be kept out
of reach of children.
• When disposing of batteries, they
must be discharged or the capacity
must be fully depleted. Cover exposed
terminals with adhesive tape in order
to prevent short-circuiting!
Safety instructions:
• The product may never be structurally
modified, otherwise it can be dam-
aged or pose a danger.
• In order to prevent risks, never
operate the aircraft when you are
sitting on the ground or on a chair.
Operate the aircraft from a position
that allows easy evasion if needed.
• Always switch off the aircraft and the
remote control after use. Otherwise,
it is possible for the model to be
unintentionally started.
Required batteries for the
helicopter:
Power supply:
Rated output: DC 3.7 V / 0.74 Wh
Batteries: 1 x 3.7 V rechargeable
LiPo battery (integrated)
Capacity: 200 mAh
USB charger:
Power supply: ====
DC 5 V / 500 Wh
Battery requirement for
the remote control:
Power supply:
DC 9 V
Batteries: 6 x 1.5 V “AA”