Revell Control 24067, Руководство пользователя

Страница: 7 / 68

7
caution: Before charging and after each flight, the battery must cool down for 10 to 15 minutes. Otherwise the battery may be damaged. The charging procedure is electronically monitored;
in spite of this the device must not be left unsupervised.
recharging the helicopter
1. Switch off the helicopter and the
remote control unit.
2. Insert the charging cable plug carefully into
the charging socket on the helicopter (Fig. 1).
The plug should fit into the charging socket
easily - DO NOT USE FORCE. If the plug is not
inserted correctly into the charging socket, the
helicopter may be damaged and there may be
a risk of injury.
3. Switch on the remote control unit; the Power
LED will light up red (Fig. 2).
4. The charging status LED will now light up green
to indicate the charging procedure (Fig. 3)
5. The charging procedure is complete as soon as
the green LED has gone out completely.
6. After the charging procedure, set the power
switch to “OFF” and disconnect the charging
cable from the helicopter again.
After a charging time of approx. 30 minutes, the helicopter is able to fly for
approximately 5-7 minutes.
Helicopter and remote control unit
Fig. 3 Fig. 2
ON/OFF switch
Searchlights
HeLicoPTer:
Insert Batteries
1. Screw open the cover and
remove it.
2. Insert 6 x 1.5 V AA batteries and
observe the polarity information as
shown in the battery compartment.
3. Close the battery compartment
cover and screw it shut.
reMoTe coNTroL uNiT:
Fig. 1
You can also charge your helicopter with
the enclosed USB cable:
a. Switch off the helicopter
b. Insert the charging cable plug carefully
into the charging socket on the
helicopter (Fig. 1). The plug should fit
into the charging socket easily - DO NOT
USE FORCE. If the plug is not inserted
correctly into the charging socket, the
helicopter may be damaged and there
may be a risk of injury.
c. Insert the USB plug into a free USB port
d. The charging procedure is complete as
soon as the USB plug lights up
e. After charging, remove the USB plug
from the USB port
Contradirectional
rotor blades
Stabiliser
Tail rotor
Memory card insert
Landing skids
Camera module
LED lighting
Actuating regulator
up/down
Control switch
Forward/backward flight
Fly to the right/left
Button for photos
Light on/off button
Power indicator lamp
Button for video Not allocated
Demo button Turbo button
Channel selector
(A, B, C)
charging status LED
Trim buttons left/right
Charging cable
compartment
English
24067_RC_Anl_Moovee_08.indd 7 16.12.11 14:30