Reveal NE3613HSSV, Руководство пользователя

Страница: 6 / 27

6
INSTALLATION: DISCONNECTION & REMOVAL OF CASE FROM SKID / REVIEW CASE SURROUNDINGS
1. Disconnect Case From Skid
 Remove screws from shipping brackets.
Remove and discard shipping brackets from
Skid.
 Place J-bar/pry under base frame.
Raise case up from Skid to take weight off
casters.
 With case raised, lower casters all the way
down against Skid (see next step for detailed
instructions on lowering or raising casters).
 Remove rubber shipping blocks.
Skid
Support case
while removing
from Skid
Handles
2. Carefully Remove Case From Skid
 Use handles to carefully slide case to
rear of Skid (see illustration at right).
 Caution! 4 people may be required
for this task!
 Carefully lower to floor. Slide Skid
from under case.
 Maintain support of case at all
times or center of gravity may
cause case to fall.
Skid
Rubber Shipping
Blocks (Typ.)
Shipping
Bracket (Typ.)
3. Review Case Surroundings
 Check if case is affected by
HVAC vents or outside door
airflow. If so, such airflow must
be prevented from entering the
case.
 Otherwise, the case’s ‘air
screen’ may be compromised
causing unsafe food
temperatures.
 See sample illustrations shown
at right.
Sample
HVAC Vents