9
RADA SeNSe CONTROL PANeL
Template
Caution!
Do not trap the cable.
Remove excess sealant.
7
Caution!
Make sure Silicone Sealant is applied in the groove on
the back of the Control Panel to stop water ingress into
the data cable access hole in the finished wall.
5
6
3
4
1
2
The Rada Sense Control Panel
MUST NOT
be installed in areas where high
frequency lighting is used. Certain types of compact fluorescent and low voltage
lighting use high frequency lamps that can interfere with the infrared system used
in the control panel. We recommend standard switch-start fluorescent lighting to be
installed within these areas.
Note!
If the data cable is installed within a stud partition or recessed into a wall, make
sure it is placed within a suitable conduit to allow easy removal during servicing.
The Control Panel must only be installed onto a flat wall surface.