3
A range of concealed 1/2” digital mixing valves (DMV) with wall mounted no-touch
control panel for flow and temperature control. Functions include timed flow control,
duty flush and thermal disinfection.
SAFeTY : WARNINGS
The function of this DMV is to deliver water consistently at a desired temperature.
This requires that:
1.
It is installed, commissioned, operated and maintained in accordance with the
recommendations given in this Manual.
2.
Periodic attention is given, as necessary, to maintain the product in good
functional order. Recommended guidelines are given in the PLANNED
MAINTENANCE section.
3.
Using this product outside the specification limits given in this Manual can
present potential risk to users.
4.
The electrical installation must comply to “BS 7671 - Requirements for Electrical
Installations”, commonly referred to as the IEE Wiring Regulations - Part 7, or
any particular regulations and practices, specified by the local electricity supply
company.
5.
DO NOT
fit any form of outlet flow control i.e. trigger handset. Use only
recommended fittings.
The use of the word ‘failsafe’ to describe the function of any mixing valve is both
incorrect and misleading. This electronic valve incorporates additional shut-off
devices to improve the level of safety however, in keeping with every other mechanism
it cannot be considered as being functionally infallible.
Where chlorine disinfection is practised,
DO NOT
exceed a chlorine concentration of
50 mg/l (ppm) in water, per one hour dwell time. Such procedures must be conducted
strictly in accordance with the information supplied with the disinfectant and with all
relevant Guidelines/Approved Codes of Practice.
DeSCRIPTION