REV Midwest Automotive Design American Coach Patriot 2022, Руководство пользователя

Страница: 68 / 178

A M E R I C A N C O A C H P A T R I O T O W N E R ’ S M A N U A L
A M E R I C A N C O A C H // P A T R I O T S E C T I O N 7 // 6 6
To recline the seats, lift up on the lever located on the lower left side of
the seat and gently lay the seat backwards� Never operate the vehicle
with the seats in the reclined position�
The second row of seats are also removable� To remove the seat� Lift
up on the locking lever, which is located on the bottom right side of the
seat� Rotate the seat forward to remove it�
See image below �
To reattach the removable seats, follow these procedures:
STEP 1
Position the seat facing forward and directly above the
steel floor mounting plate.
STEP 2
Tilt the seat slightly forward and guide the two front steel
seat hooks into the corresponding holes / slots in the steel
floor plate. The mounting teeth must fully engage the front
edge of the forward holes in the floor plate.
STEP 3
Reconnect the optional massage function’s electrical plug
(if equipped). Plug the white plastic connectors together.
Then route the wire assembly so it will not be trapped or
pinched between the seat frame and the floor mounting
plate once the seat is lowered�
STEP 4
While maintaining forward pressure to ensure the front pair
of teeth remain engaged with the floor plate, carefully rotate
the seat downwards to the floor. Gently lift and hold the
seat release handle to raise the rear pair of seat latching
hooks as you lower the seat� This will allow the seat to
make complete contact with the floor mounting plate.
STEP 5
Allow the seat release handle to return to its normal
position and firmly press down on the seat cushion to
ensure the rear set of hooks have fully engaged with the
floor mounting plate. Check to ensure the seat is sitting
level and is locked firmly into the floor mounting plate by
attempting to pull the seatback upward and forward to
confirm that the entire seat assembly has locked in place.
If the seat rolls forward and / or raises up off the floor
plate it is not secure�
DANGER
Failure to securely lock the seat to the steel floor mounting
plate could cause it to suddenly detach from the floor while
the vehicle is either stationary or in motion, resulting in
serious physical injuries and / or death.
danger