Returnstar Interactive Technology Group Co., Ltd.
8
3.2 Wall Mounting
（
L-type Bracket
）
Parts list
No.
Picture
Item
Qty
1
Flat Cross-tapping Screw
8
2
Wall Anchor
8
3
L-type Bracket
4
Installation steps
Step 1. Determine the fixed position and height of the IQBoard according to the actual
use of the site.
Step 2. Determine the installation height of the bottom L-type Brackets according to
the location of IQBoard on the wall. Then determine the installation height of the upper
L-type Brackets according to the size of your IQBoard. Make sure when you pull up
the upper brackets, IQBoard can be taken out; and when you pull them down,
IQBoard frame can be clasped. Two upper/bottom brackets should be on the same
height level. You will need 2 screws for each of bottom Brackets, and 1 screw for each
of the upper ones. To determine the position of brackets, take an 82
” IQBoard for e.g.
as below:
IQBoard
L(mm)
H1(mm)
H2(mm)
82”
700
20
1175
