How the transmitter screen shows
when is on
30%
60%
90%
How the transmitter screen shows
when it is off
Battery symbol flashes to the 1st bar while charging, which means the transmitter is
30% charged. If it flashes to 2nd bar, means the transmitter is 60% charged. To 3rd bar,
means 90% charged, till it no long flashes, then it is fully charged. The battery symbol
will vanish 10 seconds later.
Charging
:
LASER
Charger
USB cable
If IQAudio Wireless MIC is at low battery, please charge it as soon as possible. If it is
unused for one month, please charge it at least once.
Charging Display Status:
IQAudio Wireless MIC
To charge the transmitter, connect charger with USB cable, and then connect the other
end of USB cable to IQAudio Wireless MIC USB connector.As shown below.
01
OFF
CH:
01
OFF
CH:
01
OFF
CH:
5. Specifications
IQAudio Wireless MIC Receiver
IQAudio Wireless MIC
-09-
-08-
Oscillation Mode
Modulation Mode
RF Carrier Frequency Range
Max. Channel Number
Frequency Bandwidth
System Compatibility
RE Sensitivity
Frequency Response
S/N Ratio
T.H.D.
Dynamic Range
Working Range
Output Connectors
Audio Output Level
Power Requirements
Dimensions(H*W*T)
Weight
PLL Synthesizer
π/4 QPFKS (Quadrature Modulation)
650~675MHz
64
25MHz
4 receivers can be used simultaneously
<-90dBm
70~15KHz(±3db)
≥80dB(A)
<0.1%1KHZ
>85dB
<15
Φ6.35 Jack Connector
>+5dBV max
DC12V/500MA
44*212*100mm
500g
RF Carrier Frequency Range
Max. Channel Number
Pilot Mode
Display Mode
RF Power Output
Input Impedance
Spurious Rejection
Frequency Bandwidth
Max. Input Level
Gain Adjusting Range
Power Requirements
Battery life
Battery Charging Time
REID/Bluetooth Radiant Power
650~675MHz
64
Digital Pilot
OLED Screen
≥3dBm
2.2KΩ
>50dBc
25MHz
≥300MvRms at max. Gain
8dB
3.7V/800mAh lithium battery*1
About 8h
About 2.5h
≥-10dBm
