RFID
Sync:
Near
RFID
Sync:
Far
Select “Near” as near synchronizing distance, which is about 3 meters.
Select “Far” as far synchronizing distance, which is about 5 meters.
PowerSave
TimeOut:
Minutes
99
PowerSave
Sleep:
ON
PowerSave
Sleep:
OFF
Turn on both Receiver and Wireless MIC. The Wireless MIC displays
“SYNC”, which means automatic synchronization finishes.
SYNC
Synchronization
：
Power save mode
:
Long press “VOL+” button, meanwhile, long press “SET” button to go into power save
setting mode.
Select “ON” to go into time setup. The unit is
minute. After set up time, press “SET” button
to confirm.
To exit power save mode, long press “VOL+” button. Meantime, select
“OFF” and press “SET” button to confirm.
Synchronizing distance setup:
Long press “VOL-” button, meanwhile, long press “SET” button to go into synchronizing
distance setup.
4. Instructions
Short press “ ” up selecting button, the power point will turn page up. Short press
“ ”down selecting button, the power point will turn page down. Long press “ ”up
selecting button, the power point goes into full screen display. Long press “ ” down
selecting button, the power point exit full screen display.
Infrared laser pointer
：
LASER
Short press set
、
laser light button “
”
to use infrared laser pointer
Red beam transmits from “LASER” aperture about one second later.
SET
PPT Page Turning Operation:
Notice: Transmitting infrared laser light directly to human eyes is
forbidden, which may cause damage to human eyes.
Plug USB receiving device into the USB connector of a computer.(Please make sure
the USB connector is in good condition).
The computer will install program automatically to support USB receiving device.(The
installation occurs only when USB receiving device is connected to the computer for
the first time).
SET
01
OFF
CH:
-07-
-06-
