Controlling the Device
31
Pos : 17.6 /0005 RET SCH/ 0030 Ü bers chrift en/ 1. 1 Ü bersc hrift en/11 Prozess st oppen @ 14\m od_1456233331230_9.docx @ 98995 @ 3 @ 1
8.1.2 Stop Process
Pos : 17.7 /0005 RET SCH/ 0005 Bedienungs anl eit ung en/AS 200 / AS 300 seri e/Module/5010 Prozess st oppen AS 200 / AS 300 Serie B @ 14\mod_1456233850506_9. docx @ 99021 @ @ 1
The sieving process will stop automatically after the set process time has elapsed. However, the
sieving process can be stopped manually at any time.
Press the
button (
H1
) to stop the sieving process.
By pressing the
button, the sieving process stops, the red LED lights up and the green
LED of the
button (
H2
) turns off.
Press the
button (
H1
) a second time to put the device into
Pos : 17.8 /0005 RET SCH/ 0030 Ü bers chrift en/ 1. 1 Ü bersc hrift en/11 Prozess pausier en @ 14\m od_1456233329534_9.docx @ 98969 @ 2 @ 1
8.2 Pause Process
Pos : 17.9 /0005 RET SCH/ 0005 Bedienungs anl eit ung en/AS 200 / AS 300 seri e/Module/5015 Prozess pausier en AS 200 / AS 300 Serie B @ 14\mod_1456233851016_9. docx @ 99034 @ @ 1
The sieving process will stop automatically after the set process time has elapsed. However, the
sieving process can be interrupted manually at any time.
Press the
button (
H3
) to interrupt the sieving process.
The process time is stopped and the green LED of the
button (
H3
) flashes.
Continue the process:
Press the
button (
H2
) to continue with the sieving process.
End the process:
Press the
button (
H1
) to end the sieving process.
Pos : 17.10 / 0005 R ET SCH/ 0030 Übersc hrift en/1.1 Übersc hriften/ 11 Amplit ude @ 14 \mod_1456309857037_9. docx @ 99344 @ 2 @ 1
8.3 Amplitude
Pos : 17.11 / 0005 R ET SCH/ 0005 Bedienung sanl eitungen/ AS 200 / AS 300 s erie/Modul e/ 5020 Amplit ude AS 300 c ontrol B @ 16 \mod_1461141678533_9. docx @ 105056 @ @ 1
The amplitude display (
H4
) shows the set amplitude value depending on the setting either in
mm or g (acceleration of gravity). The amplitude value is adjustable between 0.20 mm (1 g) and
2.20 mm (15.5 g). When the device is switched on, the last used amplitude is preset.
Press the "+" or "-" button to set the desired amplitude.
Press and hold the "-" or "+" button to increased or decreased the amplitude in steps of
0.1 mm (1 g), respectively.
The amplitude can also be changed during operation by pressing the "+" or "-" button. An
exceeding or falling below of 2.20 mm or 0.20 mm respectively is not possible.
The amplitude can either be displayed as the height of lift in mm or as a multiple of gravity g
(9.81 m/s
2
), the so called gravitational acceleration.
Simultaneously press the "+" and "-" button to toggle the display between "mm" and "g".
Pos : 17.12 / 0005 R ET SCH/ 0005 Bedienungsanl eitungen/ AS 200 / AS 300 s erie/Modul e/ 5022 Amplit udenk ontr olle AS 200 digit c A/c ontrol / AS 300 contr ol B / AS 450 c ontrol C @ 14\m od_1456319629877_9.docx @ 99546 @ @ 1
During the sieving process, the amplitude is kept constant within a predetermined tolerance of
0.1 mm.
Содержание AS300
Страница 2: ...2 Copyright Copyright by Retsch GmbH Retsch Allee 1 5 42781 Haan Germany ...
Страница 5: ...Notes on the manual 5 ...
Страница 56: ......
Страница 57: ...Copyright Copyright by Retsch GmbH Retsch Allee 1 5 42781 Haan Germany ...
