21.11.2001
Retsch GmbH
19
Doc. No E98.014-016.9999 A
Operation for the AS200 digit
Switching on and off
The main switch
J
is located at the left-front on the AS200; see
Fig. 8
* Turn the main switch on.
* The
interval off
LED lights,
Fig. 9
* Two bars light in the
time
display, see
Fig. 9
The
AS200 is now ready for operation, without the interval
function, in continuous duty.
Fig. 8
Start - Interrupt - Stop
Fig. 9
Start: Fig. 9
* Press the START button
W1
.
* The green LED above button
W1
lights.
Interruption (pause function): Fig. 9
* Press the STOP button
X1
once.
* The red LED above button
X1
lights.
* Sieving is suspended; values remain visible in the
display.
* Press the START button
W1
.
* The sieving process will be resumed.
Stop (standby function): Fig. 9
* Press the STOP button
X1
twice
* Red LED above button
X1
lights.
* The entire display goes out.
* Activate the LED displays: press button
W1
once.
* New values can now be entered.
* Press the START button
W1
a second time
* The same function will be executed as with the
start
function.
