STEP 1a
4
CONNECTING THE SM-L200
First,
we’ll
set the equipment up and connect them to a power source (power adapter, PC, USB charger,
etc.)
Insert the battery pack into the back of the SM-L200, connect the USB charging cable to the port on the
left of the SM-L200 and an available power source. Turn it on by pressing and holding the
MODE
button,
the LCD will display the
printer’s
status.
Insert Battery Pack
Insert the battery pack into the back
of the printer as illustrated
.
Secure the battery pack by pressing
the hook area until it clicks
.
Switch Printer On
Turn on the printer by pressing and holding the
MODE
button. The LED indicator for Power on
the front of the printer will be
green
.
Charge the Battery Pack
To charge the battery pack, plug the smaller end
of the USB charging cable into the USB port
located on the left of the printer . Connect the
other end of the USB cable to a power source .
A full charge may take up to 5 hours.
Optional:
You may remove your USB charging
cable after the printer is sufficiently charged.
