walkie talkie has a RF15Exposure Product Label. Also, your Retevis
user manual, or separate safety booklet includes information and
operating instructions required to control your RF exposure and to
satisfy compliance requirements.
Radio License
Governments keep the radios in classification, most of the classified
walkie-talkie need to get local government License, and operation is
allowed. The detailed classification and the use of your two radios,
please contact the local government radio mana gement departments.
For the following specified classification: the USA FRS, Australian CB,
the individual license is not required.
Compliance with RF Exposure Standards (If appropriate,
Reference to the actual products Safety Marking)
Your Retevis walkie talkie is designed and tested to comply with a
number of national and International standards and guidelines (listed
below) for human exposure to radio frequency electro-magnetic energy.
FCC ID
The FCCID means: This radio complies with the IEEE (FCC) and
ICNIRP exposure limits for occupational/controlled RF exposure
environments at operating duty factors of up to 50% talk-50% listen
and is approved for occupational use only.
IC ID
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
In terms of measuring RF energy for compliance with these exposure
guidelines, your radio generates measurable RF energy only while it is
transmitting (during talking), not when it is receiving (listening) or in
standby mode.
Note: The approved batteries, supplied with this radio, are rated for a
5-5-90 duty factor (5% talk-5% listen-90% standby) even though
this radio complies with FCC occupational exposure limits and
may operate at duty factors of up to 50% talk.
RF energy exposure standards and guidelines (if appropriate)
Your Retevis walkie talkie complies with the following RF energy
exposure standards and guidelines:
• United States Federal Communications Commission (FCC), Code of
Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-2005
• IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with
FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields.
• Institute of Electrical and Electronic Engineers (IEEE) C95.3-2002
• International Commission on Non-Ionizing Radiation Protection
(ICNIRP)
• Ministry of Health (Canada) Safety Code 6 & Industry Canada
RSS-102.
• International Electrotechnical Com-mission IEC62209-2:2010
RF Exposure Compliance and Control Guidelines and
Operating Instructions
To control your exposure and ensure compliance with the occupational/
controlled environment exposure limits, always adhere to the following
procedures.
Guidelines:
• User
awareness instructions should accompany the device when
transferred to other users.
• Do not use this device if the operational requirements described
herein are not met.
Operating Instructions:
• Transm
it no more than the rated duty factor of 50% of the time. To
Transmit (Talk), push the Push To Talk (PTT) button. To receive calls
(listen), release the PTT button. Transmitting 50% of the time, or less,
is important because the radio generates measurable RF energy
exposure only when transmitting in terms of measuring for standards
compliance.
• Transmit only when people outside the vehicle are at least the
recommended minimum lateral distance away from a properly installed
15
16
