The Scan icon will continue to be displayed when scan
is on. Your radio will continue to scan all channels and
stop if an incoming transmission is detected. Your radio
will remain on that channel for 10 seconds.
During scanning (while receiving an incoming
transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on
that channel. Your radio will remain on that channel
and return to Standby mode.
b. Press the Up or Down button to resume scanning
channels.
c. Press and hold the Scan button to return to Standby.
Privacy Code Scan
Your radio can automatically scan the Privacy Codes (either CTCSS 01
through 38 or DCS 01 through 83) within one channel. Only one set of
privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1. While in Standby mode, press and release the Scan
button twice (CTCSS) or three times (DCS) until the
CTCSS or DCS icon and numbers are flashing.
2. Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
The Scan icon wi l l continue to be displayed when
privacy code scan is on. Your radio wi l l continue to
scan privacy codes and stop as an incoming transmission
is detected. Your radio wi l l remain on that channel/
privacy code for 10 seconds.
Duri
ng scanning (while receiving an incoming
transmission),you can choose from the following:
a. Press the Menu/Power button to enter the new setting
and proceed to other functions.
b. Press and hold the Menu button to enter the new
setting and return to Standby mode.
c. Press PTT or Cal l/Lock button to enter the new
setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
NOAA* All Hazards Radio Channels
You can use your radio to l isten to NOAA Al l Hazards Radio channels
transmitting in your area.
To l isten to Al l Hazards Radio channels:
1. Press and hold the Weather( ) button until the All
Hazards Radio icon and the currently selected All
Hazards Radio channel are displayed.
2. Use the Up or Down button to change All Hazards
Radio channels.
3. The All Hazards Radio icon will continue to be
displayed when All Hazards Radio is on.
4. To exit All Hazards Radio, press and hold the Weather
button until On or Off is displayed.
* National Oceanographic and Atmospheric Administration
Hazards Radio Icon
Weather (WX) Alert Mo
de
Turning On the Weather Alert function will allow your radio to
automatically receive NOAA Hazard Alert radio signals and warnings
from designated NOAA broadcast stations. If the radio is turned ON,
it will alert to Weather and other emergency alerts broadcast by NOAA.
To turn Weather Alert On or Off:
1. Press the MENU/Power button unti l the Weather
Alert icon flashes on the display. The current On or Off
setting is displayed.
2. Press the Up and Down button to turn Weather Aler
On or Off.
3. Press and hold the Weather/Scan button again to
save the new setting and exit the Weather Alert Mode
and return to Standby mode.
This radio is rain resistant to JIS4 standards.
11
12
The radio ignores specific privacy codes while
scanning channels.
Scan Channels
This feature is set
to OFF by default.
Make sure the strongest Weather
channel is selected for your area
using the channel selection in the
previous menu.
Hazards
Radio
Icon
Select Channel
Scan Privacy Codes
