To turn VOX mode on or off:
1. Press the Menu/Power button unti l the VOX icon
flashes on the display. The current On or Off setting
is displayed.
2. Press the Up or Down button to turn VOX On or Off.
3. Press the Mode/Power button to enter the new setting
and proceed to other functions, or press PTT button
to enter the new setting and return to Standby mode.
Do not press any buttons for 15 seconds to enter the
new setting and return to Standby mode.
Ten Call Tone Settings
You can choose between ten different Call Tone Settings
to transmit a call alert.
To change a call tone setting:
1. Press the Menu/Power button until the letter “C” and
the current call tone number (01 through 10) is
displayed. The current cal l tone will sound for three
seconds.
2. Press the Up or Down button to hear the other call
tone settings.
3. Choose one of the following:
a. Press the Menu/Power button to enter the new
setting and proceed to other functions.
b. Press and hold the Mode button to enter the new
setting and return to Standby mode.
c. Press PTT or Call/Lock button to enter the new
setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Roger Beep Confirmation Tone
Your listener wi l l hear an audible tone when you release the PTT
button.This alerts the other party that you are finished talking and it
is OK for them to speak.
To turn roger beep on or off:
1. Press the Menu/Power button until the Roger Beep
icon flashes. The current on or off setting is displayed.
2. Press the Up or Down button to select roger
beep on or off.
3. Choose one of the fol lowing:
a. Press the Menu/Power button to enter the new
setting and proceed to other functions.
b. Press and hold the Menu button to enter the new
setting and return to Standby mode.
c. Press PTT or Call/Lock button to enter the new
setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Key Tone On/O
ff
When Key Tone is On, the Key Tone icon will be displayed, an
audible tone will sound each time a button is pressed.
To turn key tone on or off:
1. Current key tone status On/Off will flash.
2. Press the Up or Down button to select key tone on or
off.
3. Choose one of the fol lowing:
a. Press the Menu/Power button to enter the new
setting and proceed to other functions.
b. Press and hold the Menu button to enter the new
setting and return to Standby mode.
c. Press PTT or Cal l/Lock button to enter the new
setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Channel Scan
Your microTALK® radio can automatical ly scan channels.
To scan channels:
1. Press and release the Scan button unti l the Scan
icon and the channel numbers appear on the display.
2. Press and hold the Scan button to begin scanning
channels.
9
10
The current VOX sensitivity level is displayed with
letters “L” and a Number 1 through 3, with Number
3 being the most sensitive level and Number 1
being the least sensitive level.
Call Tone Setting
Roger Beep Off
