Install the antenna
Hold the antenna base, and screw
the antenna clockwise into the port
on the top of the walkie-talkie until
it is tight.
Install/remove belt clip
If necessary, you can lock the supplied
belt clip into the screw hole on the back
of the battery pack for easy carrying.
To remove the belt clip, just unscrew the
two screws.
Note: The side button 1/side button 2 can be programmed with software to define the long press or short press
function, with the following Several functions can be defined:
Side keys: 1. None 2. Monitor 3. Instant monitor 4. High and low power 5. Scan
6. Flashlight 7. Channel plus 8. Channel minus
Basic operation
Power on/off
Turn the power switch/volume adjuster clockwise, Until you hear a "click"
sound. Make a sound a short tone indicates that the boot test is successful.
Note:
If your walkie-talkie does not turn on, please check the battery. Make sure
the battery is charged and installed correctly. If your walkie-talkie does not
turn on, please contact your agent.
To turn off the radio, turn the power switch/volume adjuster counterclockwise
until you hear a "click" sound.
Adjust volume
When the two-way radio is turned on, turn the power switch/volume adjuster
to adjust the volume. Rotate clockwise to increase the volume; rotate count-
erclockwise to decrease the volume. You can press the button programmed
to monitor to monitor the current volume level.
Note: The monitor button is set to the programming 1 or 2 button according
to the software programming.
Adjust channel
Select the channel to be used by the channel side key, this walkie-talkie has
a total of 32 channels
Antenna
Indicator
Volume/power switch
Programming cable /
External headset port
PTT button
PF1 definition key/
Channel increment
PF2 definition key/
Channel increment
Flashlight
Speaker
Microphone
Install the walkie-talkie sling
Put the walkie-talkie strap on the
ring in the middle of the
walkie-talkie
Acquainted the radio
03
04
