22
www.restek.com
Startup Screen:
• Initial screen is for locating the pump or detector.
• If communication does not initialize or if the pump is not on this list: click on the “Poll Com Port For
Device” button.
• This will scan 9 possible PC COM ports for the attached device.
• When the device is found, click on the” Continue” button.
• Be sure the device is found before moving on. This assigns a port to open for all remaining screens.
Main Screen:
• General pump information is displayed along with firmware identification.
• Information screens are updated automatically, however, refresh buttons are available for pump information.
• Basic operations and basic flow rate buttons are available.
• Flow rate buttons for higher flows are available if the pump head type is set for the larger flow varieties.
• Multiple pumps (located by the previous screen) can be brought to the active screen by selecting the pump in the COM’s
window.
- This window will automatically be displayed if multiple pumps are located on COM ports on the computer.
- The pump information window will update only when it is selected (“clicked on”). It updates with the
information for the pump on the COM port selected.
