Restek 26408, Руководство оператора

Страница: 16 / 28

16
www.restek.com
7.
List of Replacement Parts
DUAL HEAD, SS, 6ML
880201* Seal Kit, Aqueous, 6mL
880202* Seal Kit, Organic, 6mL
880404* Check Valve Kit
880701 Outlet Filter Element
880721 Inlet Filter Elements (2)
880651 Prime Purge Valve Rebuild Kit
160557* Head Kit Replacement, 5mL
880353* Series II-IV Piston, 5mL
880617 Transducer/Tee Assembly
880136 Dual Head SMT Board Set (pump serial # > 20,000)
880111 Dual Head Board Set (pump serial # < 20,000)
880122 Front Panel Assembly
880904 Dual Head Overlay
DUAL HEAD, SS, 12ML
880203* Seal Kit, Aqueous, 12mL
880204* Seal Kit, Organic, 12mL
880401* Check Valve Kit
880701 Outlet Filter Element
880721 Inlet Filter Elements (2)
880651 Prime Purge Valve Rebuild Kit
160554* Head Kit Replacement, 12mL
880354* Series II-IV Piston, 12mL
880617 Transducer/Tee Assembly
880139 Dual Head SMT Board Set (pump serial # > 20,000)
880112 Dual Head Board Set (pump serial # < 20,000)
880122 Front Panel Assembly
880904 Dual Head Overlay
* Part number for single piece, 2 are required for the dual piston pump.
Appendix A
A.1 Rear Panel Serial Communications Port
An RS-232C modular jack is provided on the back panel. A computer, with appropriate software, can be used as a remote
controlling device for pump operation via this connection.
A.1.1 Hardware Implementation
The REMOTE INPUT serial communications port is configured for 9600 baud, 8 data bits, 1 stop bit, and no parity. The
connector is a standard RJ-11 modular telephone type jack. When looking at the connector on the rear panel of the pump, pin 1
is at the top and pin 6 is at the bottom. The pin-out is:
Pin Function
1, 6 Ground
2 DSR (Handshaking input to pump)
3 RXD (Serial data input to pump)
4 TXD (Serial data output from pump)
5 DTR (Handshaking output from pump)