Restech Dx-pH Measurement System, Инструкция по эксплуатации

Страница: 26 / 34

26
Note:
After altering the graph, be sure to recalculate the points in the “Report” menu and select
“Save Graph” from the “Graphs” menu.
Viewing the Report and Diary
To view the report, select “View Report” from the Report menu.
A warning will appear to remind you to recalculate the points if you have made changes to
the graph or other data. The following message will appear if you choose to recalculate the
data:
Wait until the message disappears before clicking anything: doing so before appropriate
will only increase your wait time.
The report contains fields for the following information:
Patient name (first and last), patient number, birth date, study date, gender, height, weight,
Investigator, and referring doctor. The patient name (first and last) and study date are
required fields in specific formats.
The user defined events are displayed, and if none were entered, the words “Event 1, Event
2 and Event 3” will fill the space.
Also in the report are the arithmetic mean, standard deviation, variance, median, maximum,
and minimum values.
The pH events are numbered alongside the lowest pH and the start time of the event.
In the patient diary, the “symptoms” are listed in chronological order with a start and stop
time for each symptom. Supine and Meal periods are listed here as well.
You can alter the patient diary in the event that a button was inadvertently pressed or was
not pressed when it should have been because the patient forgot to. If you must enter time
based on the patient diary, such as a meal, try to verify the time given visually by looking
at that point on the graph to check for coincidence.