D=45.8
Purpose
Set the current position for that axis to an entered Dimension
:
Example
X Axis
45.800mm
:
To set the current
position to
Application Tips :
The dimension preset function provides a very convenience way
to monitor your cross feed machining, the X axis machining.
a) Switch the readout to Diameter (D) display for X axis.
b) Make a slight first cut at the work piece, after finished this first cut, move the tool away
from the work piece along the Z axis, it is important that don' t move the X axis at all in
roder to keep the X axis right at the cutposition.
Make the first slight cut
at the work piece
Move the tool away from the
work piece without any move
in the x axis
c) measure the work piece by a caliper .(i.e. The measured diameter of the work piece is 45.80mm)
d) Enter the measured diameter into the readout by the dimension preset function.
e) Since the X axis tool position is now at the first cut position, by presetting the present tool
position as the measured diameter, then from now on, whatever dimension shown on the
readout is the actual diameter dimension in the work piece.
R
esson
Technologies
Dimension Preset
- 5 -
RD-13L
R
esson
Technologies
ent
I
O
On
Off
ABS
25.680
286.785
RD-13L
R
esson
Technologies
ent
I
O
On
Off
ABS
25.680
45.800
ent
ent
RD-13L
R
esson
Technologies
ent
I
O
On
Off
ABS
0.000
d 0.000
RD-13L
R
esson
Technologies
ent
I
O
On
Off
ABS
0.000
d 45.800
Содержание RD-13L
