USER MANUAL DOOROPENER
14
RESQTEC Manual DOOROPENER (DM087K01)
The standard Quick Action Couplers are lubricated by the hydraulic fluid. Clean, good working couplers therefore need
not other means of lubrication.
6.2.3 INSPECTION ON HOSE ASSEMBLIES
DO NOT TAKE UNNECESSARY RISK BY UTILIZING FAULTY HOSES! WORN OR DAMAGED HOSES CAN CAUSE SERIOUS
INJURY AND/OR DAMAGE TO THE RESQTEC SYSTEM AND OTHER PROPERTY.
6.2.2 MAINTENANCE ON COUPLERS
1.
Thoroughly check the hoses for any wear,
cuts or bruises.
• Visually check for damage.
• Check the hose assemblies for oil
leakage.
All but the smallest anomalies should
be subjected to further inspection by
an authorized person. When in doubt
ALWAYS replace the hose.
2.
Connect all components and test all
functions.
• All products should make at least two
complete cycles.
1.
Check and clean the couplers thoroughly.
• Preferably use dry, clean paper cloth.
• Mild soapy water can be used if
necessary.
• Verify smooth operation by connecting
and disconnecting al couplers at least
three times.
Do not use any additional means of
lubrication as some products might
have a negative effect on the
connector.
