3
KIT
CONTENTS
Section 2
1
x Wired Colour Camera
1 x 10m RCA (male plug ) to RCA (male plug) extension cable
1 x 12VDC power supply adaptor
1 x Camera fixings kit - wall plugs and screws
1 x Installation and operating manual
1 x Window sticker
T
ools Required:
Electric drill
5mm masonry drill bit
20mm masonry drill bit
No. 2 Philips screwdriver
3mm flat blade screwdriver
INST
ALLATION
Section 3
1.
Remove the bracket from the camera by unscrewing it from the main body as shown
below:
2.
Use the base of the camera’s bracket to mark out the 3 mounting holes on the chosen
surface. Mark out a hole for the cable connectors to pass through into the property
next to the camera.
Note: It is r
ecommended to pass the cable into the property as close to the camera as
possible to reduce the chances of any exposed cables being tampered with.
If you
Camera body position
adjustment nut
Unscrew this washer nut to loosen Camera body
from the bracket and unscrew Camera
